Spanning Tree-Mst Instance; In This Chapter; Mst Config Commands - Brocade Communications Systems RFS4000 Cli Reference Manual

Spanning tree-mst Instance

In this chapter

Use the
configuration. To switch to this instance, use the command:

mst config commands

Table
TABLE 13
Command
clrscr
end
exit
help
instance
name
no
revision
service
show
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
•
mst config commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435
instance to configure the controllers Multi Spanning Tree Protocol (MSTP)
(config-mst)
RFController(config)#spanning-tree mst configuration
RFController(config-mst)#
summarizes the
(config-mst)
MSTI Configuration Commands
Description
Clears the display screen
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Displays the system's interactive help system
Assigns a VLAN to the bridge instance
Sets a name for the MST region
Negates a command or sets defaults
Configures the revision number of the MST bridge
Invokes service commands needed to troubleshoot or debug
(config-if)
Shows running system information
commands:
instance configurations
Chapter
13
Ref.
page 436
page 437
page 438
page 439
page 440
page 441
page 442
page 443
page 444
page 446
435