Dhcp Server Instance; In This Chapter; Dhcp Config Commands - Brocade Communications Systems RFS4000 Cli Reference Manual

DHCP Server Instance

In this chapter

Use the
controller.
To move to this instance, use the command.
Also refer to

DHCP Config commands

Table 17
TABLE 17
Command
address
bootfile
class
client-identifier
client-name
clrscr
ddns
default-router
dns-server
domain-name
end
exit
hardware-address
help
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
•
DHCP Config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507
•
Configuring the DHCP server using controller CLI. . . . . . . . . . . . . . . . . . . . 537
instance to configure the DHCP server address pool associated with the
(config-dhcp)
RFController(config)#ip dhcp pool <pool-name>
RFController(config-dhcp)#
Chapter 18, "DHCP Class Instance"
summarizes
config-dhcp
DHCP Config Commands
Description
Defines the DHCP server include range
Assigns a boot file name. The bootfile name can contain
letters, numbers, dots and hyphens. Consecutive dots and
hyphens are not permitted
Associates a class with a pool and moves to the DHCP pool
class configuration mode
Uses an ASCII string as a client identifier
Assigns a client name
Clears the display screen
Configures Dynamic DNS (DDNS) values
Configures a default router's IP address
Sets the IP address of a DNS Server
Sets the domain name
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Defines the hardware address using either a dashed or
dotted hexadecimal string
Displays the interactive help system in HTML format
for other DHCP related configurations.
commands:
Chapter
17
Ref.
page 509
page 510
page 511
page 513
page 514
page 515
page 516
page 517
page 518
page 519
page 520
page 521
page 522
page 523
507