ap-standby-attempts-threshold
Wireless configuration commands
Sets the number of attempts after which the standby controller starts adopting APs.
Supported in the following platforms:
•
•
•
Syntax
Parameters
<attempts>
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
ap-standby-attempts-threshold <attempts>
Sets the number of attempts to <attempts> in the range
5–200.
RFController(config-wireless)#ap-standby-attempts-threshold 100
RFController(config-wireless)#
Wireless configuration commands
20
607