Option - Brocade Communications Systems RFS4000 Cli Reference Manual

18
DHCP Server Class config commands

option

DHCP Server Class config commands
Specifies a value for DHCP user class options
Supported in the following platforms:
•
•
•
Syntax
Parameters
user-class <class-name>
Example
Creating a DHCP user class
Complete the steps below to create a DHCP user class:
5. Create a DHCP class named RFControllerDHCPclass. The controller supports a maximum of 32
6. Create a USER class named
7.
8. Associate the DHCP class, created in Step 1 with the pool created in Step 3. The controller
9. The controller moves to a new mode (config-dhcp-class). Use this mode to add an address
550
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
option user-class <class-name>
Creates/modifies DHCP server user class options
•
RFController(config-dhcpclass)#option user-class MC800
RFController(config-dhcpclass)#
DHCP classes.
RFController(config)#ip dhcp class RFControllerDHCPclass
RFController(config-dhcpclass)#
controller supports a maximum of 8 user classes per DHCP class.
RFController(config-dhcpclass)#option user-class MC800
RFController(config-dhcpclass)#
Create a Pool named , using the
WID
RFController(config)#ip dhcp pool WID
RFController(config-dhcp)#
supports the association of 8 DHCP classes with a pool.
RFController(config-dhcp)#class RFControllerDHCPclass
RFController(config-dhcp-class)#
range for the DHCP class associated with the pool.
RFController(config-dhcp-class)#address range 11.22.33.44
<class-name> – ASCII value of user-class option
. The privilege mode changes to
MC800
mode.
(config)#
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
. The
(config-dhcpclass)
53-1001931-01