Brocade Communications Systems RFS4000 Cli Reference Manual page 799

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
retry-threshold
hold-time
Smart-RF Calibration Schedule:
schedule calibration
schedule first-start
schedule interval
Smart-RF Run Time Monitor and Recovery configuration:
recover interference
recover neighbor
recover coverage-hole
Diagnostic configuration:
Verbose Mode
Extensive Scan Mode
RFController(config-wireless-smart-rf)#
RFController(config-wireless-smart-rf)#show wireless smart-rf
calibration-status
Smart-RF Calibration is busy at delay-second
Smart Master IP:
My IP:
Cluster Master :
Last Calibration Started at: Sun Sep
Last Calibration Ended at:
Next calibration Starts at:
RFController(config-wireless-smart-rf)#
RFController(config-wireless-smart-rf)#show wireless smart-rf history
Smart Master IP:
My IP:
Cluster Master :
Last Calibration Started at: Sun Sep
Last Calibration Ended at:
Next calibration Starts at:
Smart RF assignment history since last calibration, up to 9216 entries
RFController(config-wireless-smart-rf)#
: 14.0 averaged retries/packet
: 3600 seconds
: disabled
: Sat Mar 29 03:30:00 2008
: 1 day(s)
: enabled
: enabled
: enabled
: disabled
: disabled
0.0.0.0
0.0.0.0
yes
7 06:01:48 2008
Sun Sep 7 06:01:48 2008
not scheduled
0.0.0.0
0.0.0.0
yes
7 06:03:33 2008
Sun Sep 7 06:03:33 2008
not scheduled
smart-rf config commands
25
797