Brocade Communications Systems RFS4000 Cli Reference Manual page 514

17
DHCP Config commands
config-dhcp-class
Use
set an address range for a DHCP user class within a DHCP server address pool.
Table 18
TABLE 18
address
clrscr
end
exit
help
no
service
show
address
config-dhcp-class
Sets an address range for a DHCP class within a DHCP server address pool
Syntax
Parameters
range <low IP Address>
<high IP Address>
Example
512
RFController(config-dhcp-class)#address range 11.22.33.44
to enter the (
(config-dhcp)# class
summarizes
config-dhcp-class
config-dhcp-class commands
Command
Sets an address range for a DHCP class in a DHCP server address pool
Clears the display screen
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Displays the interactive help system in HTML format
Negates a command or sets its defaults
Assists in troubleshooting or debugging issues
Displays running system information
address range <low IP Address> <high IP Address>
RFController(config-dhcp-class)#address range 11.22.13.14 11.22.33.56
RFController(config-dhcp-class)#
config-dhcp-class) instance
commands.
Description
Assigns an address range for the DHCP class
•
<low IP Address> – Defines the low IP address
•
<high IP Address> – Defines the high IP address
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
. Use this instance to
53-1001931-01