cluster-cli
User exec commands
Use this command to enter the cluster-cli context. The cluster-cli context provides centralized
management to configure all cluster members from any one member. Any command executed
under this context will be executed to all the controllers in the cluster.
A new context
executed on all members of the cluster.
Supported in the following platforms:
•
•
•
Syntax
Parameters
enable
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
redundancy
supports the cluster-cli. Any commands executed under this context are
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
cluster-cli enable
Enables the cluster context
RFController> enable
RFController:cluster-cli>
User exec commands
3
159