Brocade Communications Systems RFS4000 Cli Reference Manual page 761

no
SOLE config commands
Disables the locationing adapter(s) and its configurations
Supported in the following platforms:
•
•
•
Syntax
Parameters
aap-rssi-update-interval
locate
[aeroscout|ekahau|wireles
s-client]
wireless-client
[<MAC-Addr|enable|interva
l <5-3600>]
redundancy enable
rssi-filter
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
no [aap-rssi-update-interval|locate|mobile-nit|redundancy|
rssi-filter]
Disables AAP probe packet interval
Negates Location commands
Locates specified wireless-client
•
•
•
Disables SOLE redundancy
Disables rssi-filter value in dbm
RFController(config-rtls-sole)#no locate wireless-client enable
RFController(config-rtls-sole)#
RFController(config-rtls-sole)#no locate wireless-client interval
RFController(config-rtls-sole)#
<MAC-Addr> (enable) – Disables location of specified mobile
unit
enable – Disables location of all specified wireless clients
interval <5-3600> – Resets the location interval for the
locationing of clients
SOLE config commands
24
759