Use Case: Configuring Ip Standard Acl - Brocade Communications Systems RFS4000 Cli Reference Manual

Use case: configuring IP standard ACL

IP Standard ACLs contain rules based on Source IP Address. You can create either a Numbered IP
Standard ACL or a Named IP Standard IP Address.
Execute the following CLI commands to configure an IP based standard ACL:
1. To configure numbered IP Standard ACL:
2. To configure an IP Standard ACL:
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
mobility
ntp
password-encryption
port
port-channel
privilege
protocol-list
radius
redundancy
rtls
role
running-config
securitymgr
service-list
sessions
smtp-notifications
snmp
snmp-server
spanning-tree
startup-config
static-channel-group
terminal
timezone
traffic-shape
upgrade-status
users
version
virtual-IP
wireless
wlan-acl
RFController(config-std-nacl)#show
RFController(config)#access-list 2 deny host 1.2.3.4 rule-precedence 10
RFController(config)#access-list 3 deny host 1.2.3.4 rule-precedence 10
RFController(config)#access-list 3 permit any rule-precedence 20
Valid numbers for numbered IP Standard ACLs are from 1-99 and 1300-1999. In the above
CLI example, ACL 3 denies host with IP 1.2.3.4 and allows all other hosts.
RFController(config)#ip access-list standard ipst2
RFController(config-std-nacl)#permit host 10.1.1.10 rule-precedence 30
RFController(config-std-nacl)#deny any rule-precedence 20
Use case: configuring IP standard ACL
Display Mobility parameters
Network time protocol
password encryption
Physical/Aggregate port interface
Portchannel commands
Show current privilege level
List of protocols
RADIUS configuration commands
Display redundancy group parameters
Real Time Locating System commands
Configure role parameters
Current Operating configuration
Securitymgr parameters
List of services
Display current active open connections
Display the SNMP engine parameters
Display SNMP engine parameters
Display SNMP engine parameters
Display spanning tree information
Contents of startup configuration
static channel group membership
Display terminal configuration parameters
Display timezone
Display traffic shaping
Display last image upgrade status
Display information about currently logged
Display software & hardware version
IP reduncancy feature
Wireless configuration commands
wlan based acl
15
in users
485