network
DHCP Config commands
Sets the network pool's IP address
This address maps the current DHCP pool with a specific network.
Supported in the following platforms:
•
•
•
Syntax
Parameters
network [<IP>|<IP/Mask>]
Usage Guidelines
Ensure a VLAN interface (with specific network/subnet) exists on the controller before mapping a
DHCP pool to a particular network.
Example
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
network [<IP>|<IP/Mask>]
RFController(config-dhcp)#network
RFController(config-dhcp)#
Sets the network number and mask
•
<IP> – Network number in dotted decimal format
•
<IP/Mask> – Network number and mask
2.2.2.0/24
DHCP Config commands
17
529