Brocade Communications Systems RFS4000 Cli Reference Manual page 500

16
MAC Extended ACL config commands
no
MAC Extended ACL config commands
Negates a command or sets its defaults
Supported in the following platforms:
•
•
•
Syntax
Negates all the syntax combinations used in deny, mark and permit designations to configure the
Extended ACL
Parameters
deny
mark
permit
Example
498
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
no [deny|mark|permit]
Specifies packets to reject
Specifies packets to mark
Specifies packets to forward
RFController(config-ext-macl)#no mark tos 254 host 00:33:44:55:66:77 any type
ip rule-precedence 50
RFController(config-ext-macl)#
RFController(config-ext-macl)#no deny any any vlan 5 type 8021q
rule-precedence 10
RFController(config-ext-macl)#
RFController(config-ext-macl)#no permit any any type wisp rule-precedence 50
RFController(config-ext-macl)#
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01