Nas-Port-Id - Brocade Communications Systems RFS4000 Cli Reference Manual

20
Wireless configuration commands

nas-port-id

Wireless configuration commands
Configures the NAS port ID that must be sent to the RADIUS server
Supported in the following platforms:
•
•
•
Syntax
Parameters
<port-id>
Example
640
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
nas-port-id <port-id>
The port ID to be sent to the RADIUS server.
RFController(config-wireless)#nas-port-id portWIRELESSWELL
RFController(config-wireless)#
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01