23
RFID config commands
end
RFID config commands
Ends and exits the current mode and changes to the PRIV EXEC mode. The prompt changes
to
RFController#
Supported in the following platforms:
•
•
•
Syntax
Parameters
None
Example
742
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
end
RFController(config-rtls-rfid)#end
RFController#
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01