Cee Cli Command Completion; Cee Cli Command Output Modifiers; Table 6 Cee Cli Command Output Modifiers - Brocade Communications Systems Converged Enhanced Ethernet 8000 Administrator's Manual

If the question mark (?) is typed within an incomplete keyword but the keyword matches several
keywords, the CLI displays help for all the matching keywords.
switch#show i?
interface
ip
The CEE CLI accepts abbreviations for commands. The following example is the abbreviation for the
show qos interface all command.
switch#sh q i a
If the switch does not recognize a command after Enter is pressed, an error message displays.
switch#hookup
% Invalid input detected at '^' marker.
If an incomplete command is entered, an error message displays.
switch#show
% Incomplete command.

CEE CLI command completion

To automatically complete the spelling of commands or keywords, begin typing the command or
keyword and then press Tab. For example, at the CLI command prompt, type te and press Tab:
switch#te
The CLI displays:
switch#terminal
If there is more than one command or keyword associated with the characters typed, the CEE CLI
displays all choices. For example, at the CLI command prompt, type show l and press Tab:
switch#show l
The CLI displays:
switch#show l
lacp

CEE CLI command output modifiers

You can filter the output of the CEE CLI show commands using the output modifiers described in
Table
TABLE 6
Output modifier
append
redirect
include
exclude
append
begin
Converged Enhanced Ethernet Administrator's Guide
53-1002163-02
DRAFT: BROCADE CONFIDENTIAL
Interface status and configuration
Internet Protocol (IP)
^
line lldp
6.
CEE CLI command output modifiers
Description
Appends the output to a file.
Redirects the command output to the specified file.
Displays the command output that includes the specified expression.
Displays the command output that excludes the specified expression.
Appends the command output to the specified file.
Displays the command output that begins with the specified expression.
CEE Command Line Interface
2
19