Display {Ap | Dap} Group - 3Com Wireless LAN Switch WX1200 Command Reference Manual

display {ap | dap}
group
Displays configuration information and load-balancing status for MAP
access point groups.
Syntax —
display {ap | dap} group [name]
— Name of a MAP group or Distributed MAP group.
name
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command displays information for MAP
access point group loadbalance1:
WX1200# display ap group loadbalance1
Load Balance Grp Port Clients
---------------- ---- -------
loadbalance1
loadbalance1
Table 55 describes the fields in this display.
Table 55 Output for display ap group
Field
Load Balance Grp
Port
Clients
Status
Refused
See Also
set {ap | dap} group on page 332
Status
--------- -------
1 1 Accepting
6 6 Refusing
Description
Name of the MAP access point group.
WX port number.
Number of active client sessions on the MAP access point.
Association status of the MAP access point:
Accepting — The MAP access point is accepting new
associations.
Refusing — The MAP access point is refusing new
associations.
Number of association requests refused by the MAP access
point due to load balancing. MSS resets this counter to 0
when the WX switch is restarted, MSS is reloaded, or the
access point is removed from the group.

display {ap | dap} group

Refused
0
2
303