Set Port Trap - 3Com Wireless LAN Switch WX1200 Command Reference Manual

90 C 4: P
HAPTER ORT

set port trap

C
OMMANDS
Enables or disables Simple Network Management Protocol (SNMP) linkup
and linkdown traps on an individual port.
Syntax —
set port trap port-list {enable | disable}
port-list
— Enables the Telnet server.
enable
— Disables the Telnet server.
disable
Defaults — SNMP linkup and linkdown traps are disabled by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — The set port trap command overrides the global setting of the
set snmp trap command.
The set port type command does not affect the global trap information
displayed by the display snmp configuration command. For example, if
you globally enable linkup and linkdown traps but then disable the traps
on a single port, the display snmp configuration command still
indicates that the traps are globally enabled.
Examples — The following command enables SNMP linkup and
linkdown traps on ports 3 and 4:
WX1200# set port trap 3-4 enable
See Also
set ip snmp server on page 169
set snmp community on page 175
— List of physical ports.