Clear Rfdetect Vendor-List; Display Rfdetect Attack-List - 3Com Wireless LAN Switch WX1200 Command Reference Manual

clear rfdetect
vendor-list
display rfdetect
attack-list
Removes an entry from the permitted vendor list.
Syntax —
clear rfdetect vendor-list {client | ap} mac-addr |
all
— Specifies whether the entry is for an AP brand or a
client | ap
client brand.
mac-addr | all
remove.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following command removes client OUI
aa:bb:cc:00:00:00 from the permitted vendor list:
WX4400# clear rfdetect vendor-list client aa:bb:cc:00:00:00
success: aa:bb:cc:00:00:00 is no longer in client
vendor-list.
See Also
set rfdetect vendor-list on page 561
display rfdetect vendor-list on page 551
Displays information about the MAC addresses in the attack list.
Syntax —

display rfdetect attack-list

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
— Organizationally Unique Identifier (OUI) to

clear rfdetect vendor-list

537