Set Snmp Notify Profile - 3Com Wireless LAN Switch WX1200 Command Reference Manual

set snmp notify
profile
set ip snmp server on page 169
set snmp notify target on page 181
set snmp notify profile on page 177
set snmp protocol on page 186
set snmp security on page 187
set snmp usm on page 188
display snmp community on page 151
Configures an SNMP notification profile. A notification profile is a named
list of all the notification types that can be generated by a switch, and for
each notification type, the action to take (drop or send) when an event
occurs.
You can configure up to ten notification profiles.
Syntax — set snmp notify profile {default | profile-name}
{drop | send} {notification-type | all}
default | profile-name
creating or modifying. The profile-name can be up to 32
alphanumeric characters long, with no spaces. To modify the default
notification profile, specify default.
drop | send — Specifies the action that the SNMP engine takes with
regard to the notifications you specify with notification-type or all.
notification-type
APBootTraps—Generated when a MAP access point boots.
ApNonOperStatusTraps—Generated to indicate a MAP radio is
nonoperational.
ApOperRadioStatusTraps—Generated when the status of a
MAP radio changes.
APTimeoutTraps—Generated when a MAP access point fails to
respond to the WX switch.
AuthenTraps—Generated when the WX switch's SNMP engine
receives a bad community string.
AutoTuneRadioChannelChangeTraps—Generated when the
RF Auto-Tuning feature changes the channel on a radio.
— Name of the notification profile you are
— Name of the notification type:

set snmp notify profile

177