Clear Dot1X Quiet-Period - 3Com Wireless LAN Switch WX1200 Command Reference Manual

502 C 17: 802.1X M
HAPTER
clear dot1x
quiet-period
C
ANAGEMENT OMMANDS
Usage — This command is overridden by the set dot1x authcontrol
command. The clear dot1x port-control command returns port control
to the method configured. This command applies only to wired
authentication ports.
Examples — Type the following command to reset the wired
authentication port control:
WX4400# clear dot1x port-control
success: change accepted.
See Also
display dot1x on page 505
set dot1x port-control on page 512
Resets the quiet period after a failed authentication to the default setting.
Syntax —

clear dot1x quiet-period

Defaults — The default is 60 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to reset the 802.1X quiet
period to the default:
WX4400# clear dot1x quiet-period
success: change accepted.
See Also
display dot1x on page 505
set dot1x quiet-period on page 513