Display Version - 3Com Wireless LAN Switch WX1200 Command Reference Manual

576 C 20: F
HAPTER ILE

display version

WX1200# display version
Mobility System Software, Version: 4.1.0 QA 67
Copyright (c) 2002, 2003, 2004, 2005 3Com Corporation. All rights
reserved.
Build Information: (build#67) TOP 2005-07-21 04:41:00
Model:
Hardware
Mainboard:
PoE board:
Serial number
M C
ANAGEMENT OMMANDS
Examples — The following command shows configuration information
for VLANs:
WX4400# display config area vlan
# Configuration nvgen'd at 2004-5-21 19:36:48
# Image 3.0.0
# Model WX4400
# Last change occurred at 2004-5-21 18:20:50
set vlan 1 port 1
See Also
load config on page 578
save config on page 584
Displays software and hardware version information for an WX switch
and, optionally, for any attached MAP access points.
Syntax — display version [details]
details — Includes additional software build information and
information about the MAP access points configured on the WX
switch.
Defaults — None
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays version information for a
WX switch:
WX
version 24 ; revision 3 ; FPGA version 24
version 1 ; FPGA version 6
0321300013