Display Network-Domain - 3Com Wireless LAN Switch WX1200 Command Reference Manual

278 C 10: N
HAPTER ETWORK
display
network-domain
D C
OMAIN OMMANDS
Displays the status of Network Domain seeds and members.
Syntax —

display network-domain

Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.1.
Examples — To display Network Domain status, type the following
command. The output of the command differs based on whether the WX
switch is a member of a Network Domain or a Network Domain seed.
On a WX switch that is a Network Domain member, the following output
is displayed:
WX1200# display network-domain
Member Network Domain name: California
Member State
-------------------
10.8.107.1
On a WX switch that is a Network Domain seed, information is displayed
about the Network Domains of which the WX switch is a member, as well
as Network Domain seeds with which the WX switch has a peer
relationship. For example:
WX1200# display network-domain
Network Domain name: California
Peer
---------------
10.8.107.1
Member
---------------
10.1.0.0
Member Network Domain name:
Member
---------------
10.8.107.1
10.1.0.0
Mode
------
UP SEED
State
-------------
UP
State
-------------
DOWN
State
-----------
UP
DOWN
Mode
------
SEED
Mode
------
MEMBER
SEED