3Com Wireless LAN Switch WX1200 Command Reference Manual page 461

0 or 3—Best effort. Packets are queued in MAP forwarding
queue 3.
4 or 5—Video. Packets are queued in MAP forwarding queue 2.
Use CoS level 4 or 5 for voice over IP (VoIP) packets other than
SpectraLink Voice Priority (SVP).
6 or 7—Voice. Packets are queued in MAP forwarding queue 1.
In MSS Version 3.0, use 6 or 7 only for VoIP phones that use SVP,
not for other types of traffic.
— Blocks traffic that matches the conditions in the ACE.
deny
— IP protocol by which to filter packets:
protocol
ip
tcp
udp
icmp
A protocol number between 0 and 255.
(For a complete list of IP protocol names and numbers, see
www.iana.org/assignments/protocol-numbers.)
source-ip-addr mask
network or host from which the packet is being sent. Specify both
address and mask in dotted decimal notation. For more information,
see "Wildcard Masks" on page 26.
[
operator port port2
TCP or UDP packets to the number of the source or destination port
on source-ip-addr or destination-ip-addr. Specify one of the following
operands and the associated port:
eq — Packets are filtered for only port number.
— Packets are filtered for all ports that are greater than port
gt
number.
— Packets are filtered for all ports that are less than port
lt
number.
— Packets are filtered for all ports except port number.
neq
— Packets are filtered for ports in the range between port
range
and port2. To specify a port range, enter two port numbers. Enter
the lower port number first, followed by the higher port number.
— IP address and wildcard mask of the
] — Operand and port number(s) for matching
set security acl 461