Virtual Lan Identification; Command-Line Editing; Keyboard Shortcuts - 3Com Wireless LAN Switch WX1200 Command Reference Manual

Virtual LAN
Identification
Command-Line
Editing

Keyboard Shortcuts

A hyphen-separated range of port numbers, with no spaces. For
example:
WX1200# reset port 1-3
Any combination of single numbers, lists, and ranges. Hyphens take
precedence over commas. For example:
WX1200# display port status 1-3,6
The names of virtual LANs (VLANs), which are used in Mobility Domain
communications, are set by you and can be changed. In contrast, VLAN
ID numbers, which the wireless LAN uses locally, are determined when
the VLAN is first configured and cannot be changed. Unless otherwise
indicated, you can refer to a VLAN by either its VLAN name or its VLAN
number. CLI set and display commands use a VLAN's name or number
to uniquely identify the VLAN within the WX.
MSS editing functions are similar to those of many other network
operating systems.
The following table lists the keyboard shortcuts for entering and editing
CLI commands.
Table 4 Keyboard Shortcuts
Keyboard Shortcut(s)
Ctrl+A
Ctrl+B or Left Arrow key
Ctrl+C
Ctrl+D
Ctrl+E
Ctrl+F or Right Arrow key
Ctrl+K
Ctrl+L or Ctrl+R
Ctrl+N or Down Arrow key
Ctrl+P or Up Arrow key

Command-Line Editing

Function
Jumps to the first character of the command line.
Moves the cursor back one character.
Escapes and terminates prompts and tasks.
Deletes the character at the cursor.
Jumps to the end of the current command line.
Moves the cursor forward one character.
Deletes from the cursor to the end of the command
line.
Repeats the current command line on a new line.
Enters the next command line in the history buffer.
Enters the previous command line in the history
buffer.
29
™