3Com Wireless LAN Switch WX1200 Command Reference Manual page 246

246 C 8: AAA C
HAPTER OMMANDS
modify rule-number
the new rule. Specify the number of the existing location policy rule.
(To determine the number, use the display location policy
command.)
port port-list
location policy rule applies.
Defaults — By default, users are permitted VLAN access and assigned
security ACLs according to the VLAN-Name and Filter-Id attributes
applied to the users during normal authentication and authorization.
Access — Enabled.
History —Introduced in MSS Version 3.0. SSID option added in MSS
Version 3.2.
Usage — Only a single location policy is allowed per WX switch. Once
configured, the location policy becomes effective immediately. To disable
location policy operation, use the clear location policy command.
Conditions within a rule are ANDed. All conditions in the rule must match
for MSS to take the specified action. If the location policy contains
multiple rules, MSS compares the user information to the rules one at a
time, in the order the rules appear in the switch's configuration file,
beginning with the rule at the top of the list. MSS continues comparing
until a user matches all conditions in a rule or until there are no more
rules.
The order of rules in the location policy is important to ensure users are
properly granted or denied access. To position rules within the location
policy, use before rule-number and modify rule-number in the set
location policy command, and the clear location policy rule-number
command.
When applying security ACLs:
Use inacl inacl-name to filter traffic that enters the switch from users via
a MAP access port or wired authentication port, or from the network via
a network port.
Use outacl outacl-name to filter traffic sent from the switch to users via a
MAP access port or wired authentication port, or from the network via a
network port.
— Replaces the rule in the location policy with
— List of physical port(s) by which to determine if the