Display Radio-Profile - 3Com Wireless LAN Switch WX1200 Command Reference Manual

display
radio-profile
Table 62 describes the fields in this display.
Table 62 Output for display dap unconfigured
Field
Serial Id
Model
IP Address
Port
VLAN
See Also
display dap connection on page 313
display dap global on page 314
Displays radio profile information.
Syntax — display radio-profile {name | ?}
name — Displays information about the named radio profile.
? — Displays a list of radio profiles.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Name of the backoff timer
field changed from Client Backoff Timer to Power Backoff Timer and new
fields added in MSS Version 4.0:
Countermeasures
Active-Scan
WMM enabled
Description
Serial ID of the Distributed MAP.
MAP model number.
IP address of the MAP. This is the address that the MAP
receives from a DHCP server. The MAP uses this address to
send a Find WX message to request configuration
information from WX switches. However, the MAP cannot
use the address to establish a connection unless the MAP
first receives a configuration from a WX switch.
Port number on which this WX switch received the MAP's
Find WX message.
VLAN on which this WX switch received the MAP's Find
WX message.

display radio-profile

317