3Com Wireless LAN Switch WX1200 Command Reference Manual page 279

Table 48 describes the fields in the display.
Table 48 Radio-Specific Parameters
Parameter
Output if WX is the Network Domain Seed
Network Domain name Name of the Network Domain for which the WX switch is a seed.
Peer
State
Member
State
Mode
Output if WX is a Network Domain Member
Member Network
Domain name
Member
State
Mode
See Also
clear network-domain on page 274
set network-domain mode member seed-ip on page 280
set network-domain mode seed domain-name on page 282
set network-domain peer on page 281
Description
IP addresses of the other seeds in the Network Domain.
State of the connection between the WX switch and the
peer Network Domain seeds:
UP
DOWN
IP addresses of the seed WX switch and members in the
Network Domain.
State of the WX switch in the Network Domain:
UP
DOWN
Role of the WX switch in the Network Domain:
UP
DOWN
Name of the Network Domain of which the WX switch is a
member.
IP addresses of the seed WX switch and members in the
Network Domain.
State of the WX switch in the Network Domain.
UP
DOWN
Role of the WX switch in the Network Domain:
MEMBER
SEED
display network-domain 279