Set Service-Profile Cipher-Ccmp - 3Com Wireless LAN Switch WX1200 Command Reference Manual

set service-profile
cipher-ccmp
enable — Enables beaconing of the SSID managed by the service
profile.
disable — Disables beaconing of the SSID managed by the service
profile.
Defaults — Beaconing is enabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command disables beaconing of the SSID
managed by service profile sp2:
WX4400# set service-profile sp2 beacon disable
success: change accepted.
See Also
display service-profile on page 321
set radio-profile beacon-interval on page 355
set service-profile ssid-name on page 384
set service-profile ssid-type on page 385
Enables Counter with Cipher Block Chaining Message Authentication
Code Protocol (CCMP) encryption with WPA clients, for a service profile.
Syntax — set service-profile name cipher-ccmp
{enable | disable}
name — Service profile name.
enable — Enables CCMP encryption for WPA clients.
disable — Disables CCMP encryption for WPA clients.
Defaults — CCMP encryption is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — To use CCMP, you must also enable the WPA IE.

set service-profile cipher-ccmp

377