Clear Radius Server; Clear Server Group - 3Com Wireless LAN Switch WX1200 Command Reference Manual

clear radius server

clear server group

Removes the named RADIUS server from the WX configuration.
Syntax —
clear radius server server-name
— Name of a RADIUS server configured to perform
server-name
remote AAA services for the WX switch.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command removes the RADIUS server rs42
from a list of remote AAA servers:
WX4400# clear radius server rs42
success: change accepted.
See Also
display aaa on page 219
set radius server on page 494
Removes a RADIUS server group from the configuration, or disables load
balancing for the group.
Syntax —
clear server group group-name [load-balance]
— Name of a RADIUS server group configured to perform
group-name
remote AAA services for WX switches.
— Ability of group members to share demand for
load-balance
services among servers.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — Deleting a server group removes the server group from the
configuration. However, the members of the server group remain.
clear radius server 489