Display Igmp Receiver-Table - 3Com Wireless LAN Switch WX1200 Command Reference Manual

display igmp
receiver-table
WX1200# display igmp receiver-table vlan orange
VLAN: orange
Session
--------------- ---- --------------- ----------------- -----
224.0.0.2 none
237.255.255.255
237.255.255.255
237.255.255.255
237.255.255.255
237.255.255.255
See Also
set igmp querier on page 441
Displays the receivers to which a WX forwards multicast traffic. You can
display receivers for all VLANs, a single VLAN, or a group or groups
identified by group address and network mask.
Syntax —
display igmp receiver-table [vlan vlan-id]
[group group-ip-addr/mask-length]
vlan vlan-id
VLAN, MSS displays the multicast receivers on all VLANs.
group group-ip-addr/mask-length
of a multicast group, in CIDR format (for example, 239.20.20.10/24).
If you do not specify a group address, MSS displays the multicast
receivers for all groups.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays all multicast receivers in
VLAN orange:
Port Receiver-IP
none
5 10.10.10.11 00:02:04:06:08:0b
5 10.10.10.13 00:02:04:06:08:0d
5 10.10.10.14 00:02:04:06:08:0e
5 10.10.10.12 00:02:04:06:08:0c
5 10.10.10.10 00:02:04:06:08:0a
— VLAN name or number. If you do not specify a
Receiver-MAC
none undef

display igmp receiver-table

— IP address and subnet mask
TTL
179
179
179
179
179
429