Clear Dot1X Tx-Period; Display Dot1X - 3Com Wireless LAN Switch WX1200 Command Reference Manual

clear dot1x
tx-period

display dot1x

Resets to the default setting the number of seconds that must elapse
before the WX switch retransmits an EAP over LAN (EAPoL) packet.
Syntax —

clear dot1x tx-period

Defaults — The default is 5 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to reset the EAPoL
retransmission time:
WX4400# clear dot1x tx-period
success: change accepted.
See Also
display dot1x on page 505
set dot1x tx-period on page 516
Displays 802.1X client information for statistics and configuration
settings.
Syntax —
display dot1x {clients | stats | config}
— Displays information about active 802.1X clients,
clients
including client name, MAC address, and state.
— Displays global 802.1X statistics associated with connecting
stats
and authenticating.
— Displays a summary of the current configuration.
config
Defaults — None.
Access — Enabled.
clear dot1x tx-period 505