542
C
19: RF D
HAPTER
display rfdetect
counters
C
ETECTION
OMMANDS
Table 97 describes the fields in this display.
Table 97 display rfdetect countermeasures Output
Field
Rogue MAC
Type
Countermeasures
Radio MAC
WX-IPaddr
Port/Radio/Channel
See Also
set radio-profile countermeasures on page 355
Displays statistics for rogue and Intrusion Detection System (IDS) activity
detected by the MAPs managed by a WX switch.
Syntax —
display rfdetect counters
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.0.
Description
BSSID of the rogue.
Classification of the rogue device:
rogue—Wireless device that is on the network but is not
supposed to be on the network.
intfr—Wireless device that is not part of your network and
is not a rogue, but might be causing RF interference with
MAP radios.
known—Device that is a legitimate member of the
network.
MAC address of the 3Com radio sending countermeasures
against the rogue.
System IP address of the WX switch that is managing the
MAP that is sending or will send countermeasures.
Port number, radio number, and channel number of the
countermeasures radio. For a Distributed MAP, the
connection number is labeled dap. (This stands for distributed
ap.)