Set Network-Domain Peer - 3Com Wireless LAN Switch WX1200 Command Reference Manual

set
network-domain
peer
WX1200# set network-domain mode member seed-ip 192.168.9.254
affinity 7
success: change accepted.
See Also
clear network-domain on page 274
display network-domain on page 278
On a Network Domain seed, configures one or more WX switches as
redundant Network Domain seeds. The seeds in a Network Domain share
information about the VLANs configured on the member devices, so that
all the Network Domain seeds have the same database of VLAN
information.
Syntax — set network-domain peer ip-addr
ip-addr — IP address of the Network Domain seed to specify as a
peer, in dotted decimal notation.
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.1.
Usage — This command must be entered on a WX switch configured as
a Network Domain seed.
Examples — The following command sets the WX switch with IP address
192.168.9.254 as a peer of this Network Domain seed:
WX1200# set network-domain peer 192.168.9.254
success: change accepted.
See Also
clear network-domain on page 274
display network-domain on page 278

set network-domain peer

281