Set Ip Dns Server - 3Com Wireless LAN Switch WX1200 Command Reference Manual

166 C 7: IP S
HAPTER

set ip dns server

C
ERVICES OMMANDS
Specifies a DNS server to use for resolving hostnames you enter in CLI
commands.
Syntax —
set ip dns server ip-addr {primary | secondary}
— IP address of a DNS server, in dotted decimal or CIDR
ip-addr
notation.
— Makes the server the primary server, which MSS always
primary
consults first for resolving DNS queries.
secondary
secondary server only if the primary server does not reply.
Defaults — None.
Access — Enabled.
Usage — You can configure a WX switch to use one primary DNS server
and up to five secondary DNS servers.
Examples — The following commands configure a WX switch to use a
primary DNS server and two secondary DNS servers:
WX1200# set ip dns server 10.10.10.50/24 primary
success: change accepted.
WX1200# set ip dns server 10.10.20.69/24 secondary
success: change accepted.
WX1200# set ip dns server 10.10.30.69/24 secondary
success: change accepted.
See Also
clear ip dns domain on page 129
clear ip dns server on page 129
display ip dns on page 144
set ip dns on page 164
set ip dns domain on page 165
— Makes the server a secondary server. MSS consults a