Clear Interface - 3Com Wireless LAN Switch WX1200 Command Reference Manual

clear interface

Table 28 IP Services Commands by Usage (continued)
Type
Ping
Telnet Client
Traceroute
DHCP server
Removes an IP interface.
Syntax — clear interface vlan-id ip
vlan-id — VLAN name or number
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — If the interface you want to remove is configured as the system
IP address, removing the address can interfere with system tasks that use
the system IP address, including the following:
Mobility domain operations
Command
set snmp notify profile on page 177
set snmp notify target on page 181
set ip snmp server on page 169
display snmp status on page 153
display snmp community on page 151
display snmp usm on page 154
display snmp notify profile on page 152
display snmp notify target on page 152
display snmp counters on page 152
clear snmp community on page 133
clear snmp usm on page 134
clear snmp notify profile on page 133
clear snmp notify target on page 134
ping on page 156
telnet on page 195
traceroute on page 197
set interface dhcp-server on page 162
display dhcp-server on page 140
clear interface 127