Set Dot1X Reauth-Max - 3Com Wireless LAN Switch WX1200 Command Reference Manual

514 C 17: 802.1X M
HAPTER
set dot1x
reauth-max
C
ANAGEMENT OMMANDS
See Also
display dot1x on page 505
set dot1x reauth-max on page 514
set dot1x reauth-period on page 515
Sets the number of reauthentication attempts that the WX switch makes
before the supplicant (client) becomes unauthorized.
Syntax —
set dot1x reauth-max number-of-attempts
number-of-attempts
Defaults — The default number of reauthentication attempts is 2.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — If the number of reauthentications for a wired authentication
client is greater than the maximum number of reauthentications allowed,
MSS sends an EAP failure packet to the client and removes the client from
the network. However, MSS does not remove a wireless client from the
network under these circumstances.
Examples — Type the following command to set the number of
authentication attempts to 8:
WX4400# set dot1x reauth-max 8
success: dot1x max reauth set to 8.
See Also
display dot1x on page 505
clear dot1x reauth-max on page 503
— Specify a value between 1 and 10.