Set Igmp Proxy-Report - 3Com Wireless LAN Switch WX1200 Command Reference Manual

438 C 13: IGMP S
HAPTER
set igmp
proxy-report
C
NOOPING OMMANDS
See Also
set igmp lmqi on page 434
set igmp qi on page 439
set igmp qri on page 440
set igmp querier on page 441
set igmp mrouter on page 435
set igmp rv on page 442
Disables or reenables proxy reporting by a WX on one VLAN or all VLANs.
Syntax — set igmp proxy-report {enable | disable}
vlan vlan-id
VLAN, proxy reporting is disabled or reenabled on all VLANs.
enable — Enables proxy reporting.
— Disables proxy reporting.
disable
Defaults — Proxy reporting is enabled on all VLANs by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Proxy reporting reduces multicast overhead by sending only
one membership report for a group to the multicast routers and
discarding other membership reports for the same group. If you disable
proxy reporting, the WX sends all membership reports to the routers,
including multiple reports for the same group.
Examples — The following example disables proxy reporting on VLAN
orange:
WX1200# set igmp proxy-report disable vlan orange
success: change accepted.
See Also
set igmp rv on page 442
— VLAN name or number. If you do not specify a