Display {Ap | Dap} Group - 3Com 3CRWX120695A Command Reference Manual

242 C 9: M
HAPTER ANAGED
display {ap | dap}
group
A P C
CCESS OINT OMMANDS
Table 47 Output of display ap etherstats (continued)
Field
TxCarrierLoss
TxDeferred
Displays configuration information and load-balancing status for MAP
access point groups.
Syntax —
display {ap | dap} group [name]
— Name of an MAP group or Distributed MAP group.
name
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command displays information for MAP
access point group loadbalance1:
WX1200# display ap group loadbalance1
Load Balance Grp Port Clients
---------------- ---- -------
loadbalance1
loadbalance1
Table 48 describes the fields in this display.
Table 48 Output for display ap group
Field
Load Balance Grp
Port
Clients
Description
Number of frames transmitted despite the detection of a
deassertion of CRS during the transmission.
Number of frames deferred before transmission due to
activity on the link.
Status
--------- -------
1 1 Accepting
6 6 Refusing
Description
Name of the MAP access point group.
WX port number.
Number of active client sessions on the MAP access point.
Refused
0
2