Help - 3Com Wireless LAN Switch WX1200 Command Reference Manual

help

Defaults — None.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Usage — To display the image filenames, use the dir command. This
command does not list the boot code versions. To display the boot code
versions, use the version command.
Examples — The following command displays the system image version
installed in boot partition 1:
boot> fver boot1
File boot1:default version is 3.0.1.
See Also
dir on page 627
version on page 636
Displays a list of all the boot prompt commands or detailed information
for an individual command.
Syntax — help [command-name]
command-name — Boot prompt command.
Defaults — None.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Usage — If you specify a command name, detailed information is
displayed for that command. If you do not specify a command name, all
the boot prompt commands are listed.
help 631