3Com Wireless LAN Switch WX1200 Command Reference Manual page 528

528 C 18: S
HAPTER ESSION
M C
ANAGEMENT OMMANDS
(Table 92 on page 529 describes the additional fields of the verbose
output of display sessions network commands.)
The following command displays information about network session 27:
WX1200# display sessions network session-id 27
Global Id: SESS-27-000430-835586-58dfe5a
State: ACTIVE
Port/Radio: 3/1
MAC Address: 00:00:2d:6f:44:77
User Name: EXAMPLE Natasha
IP Address: 10.10.40.17
Vlan Name: vlan-eng
Tag: 1
Session Timeout: 1800
Authentication Method: PEAP, using server 10.10.70.20
Session statistics as updated from AP:
Unicast packets in: 653
Unicast bytes in: 46211
Unicast packets out: 450
Unicast bytes out: 50478
Multicast packets in: 317
Multicast bytes in: 10144
Number of packets with encryption errors: 0
Number of bytes with encryption errors: 0
Last packet data rate: 2
Last packet signal strength: -67 dBm
Last packet data S/N ratio: 55
Table 91 describes the output of this command. For descriptions of the
fields of display sessions network session-id output, see Table 93 on
page 530.
Table 91 display sessions network (summary) Output
Field
User Name
Sess ID
IP or MAC Address
VLAN Name
Port/Radio
Description
Up to 30 characters of the name of the authenticated user
of this session.
Locally unique number that identifies this session. An asterisk
(*) next to the session ID indicates fully active sessions.
IP address of the session user, or the user's MAC address if
the user has not yet received an IP address.
Name of the VLAN associated with the session.
Number of the port and radio through which the user is
accessing this session.