Display Location Policy; Display Mobility-Profile - 3Com Wireless LAN Switch WX1200 Command Reference Manual

224 C 8: AAA C
HAPTER
display location
policy
Id Clauses
----------------------------------------------------------------
1) deny if user eq *.theirfirm.com
2) permit vlan guest_1 if vlan neq *.wodefirm.com
3) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.wodefirm.com
display
mobility-profile
OMMANDS
Displays the list of location policy rules that make up the location policy
on an WX switch.
Syntax —

display location policy

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the list of location policy
rules in the location policy on an WX switch:
WX4400 display location policy
See Also
clear location policy on page 210
set location policy on page 244
Displays the named Mobility Profile. If you do not specify a Mobility
Profile name, this command shows all Mobility Profile names and port
lists on the WX.
Syntax —
display mobility-profile [name]
— Name of an existing Mobility Profile.
name
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.