3Com Wireless LAN Switch WX1200 Command Reference Manual page 540

540 C 19: RF D
HAPTER
C
ETECTION OMMANDS
Table 95 display rfdetect clients Output
Field
Client MAC
Client Vendor
AP MAC
AP Vendor
Port/Radio/Channel
NoL
Type
Last seen
Table 96 display rfdetect clients mac Output
Field
RSSI
Rate
Last Seen
BSSID
Vendor
Description
MAC address of the client.
Company that manufactures or sells the client.
MAC address of the radio with which the rogue client is
associated.
Company that manufactures or sells the AP with which the
rogue client is associated.
Port number, radio number, and channel number of the radio
that detected the rogue. For a Distributed MAP, the
connection number is labeled dap. (This stands for distributed
ap.)
Number of listeners. This is the number of MAP radios that
detected the rogue client.
Classification of the rogue device:
rogue—Wireless device that is on the network but is not
supposed to be on the network.
intfr—Wireless device that is not part of your network and
is not a rogue, but might be causing RF interference with
MAP radios.
known—Device that is a legitimate member of the
network.
Number of seconds since a MAP radio last detected 802.11
packets from the device.
Description
Received signal strength indication (RSSI)—the strength of the
RF signal detected by the MAP radio, in decibels referred to
1 milliwatt (dBm).
The data rate of the client.
Number of seconds since a MAP radio last detected 802.11
packets from the device.
MAC address of the SSID with which the rogue client is
associated.
Company that manufactures or sells the AP with which the
rogue client is associated.