3Com Wireless LAN Switch WX1200 Command Reference Manual page 180

180 C 7: IP S
HAPTER ERVICES
C
OMMANDS
RFDetectUnAuthorizedSsidTraps—Generated when an SSID
that is not on the permitted SSID list is detected.
all — Sends or drops all notifications.
Defaults — A default notification profile (named default) is already
configured in MSS. All notifications in the default profile are dropped by
default.
Access — Enabled.
History — Introduced in MSS Version 4.0.
Examples — The following command changes the action in the default
notification profile from drop to send for all notification types:
WX1200# set snmp notify profile default send all
success: change accepted.
The following commands create notification profile snmpprof_rfdetect,
and change the action to send for all RF detection notification types:
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectAdhocUserTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectClientViaRogueWiredAPTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectDoSTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectAdhocUserTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectInterferingRogueAPTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectInterferingRogueDisappearTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectRogueAPTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectRogueDisappearTraps
success: change accepted.