3Com Wireless LAN Switch WX1200 Command Reference Manual page 220

220 C 8: AAA C
HAPTER
set authentication admin Jose sg3
set authentication console * none
set authentication mac ssid mycorp * local
set authentication dot1x ssid mycorp Geetha eap-tls
set authentication dot1x ssid mycorp * peap-mschapv2 sg1 sg2 sg3
set authentication dot1x ssid any ** peap-mschapv2 sg1 sg2 sg3
set accounting dot1x Nin ssid mycorp stop-only sg2
set accounting admin Natasha start-stop local
set authentication last-resort ssid guestssid local
user Nin
Password = 082c6c64060b (encrypted)
Filter-Id = acl-999.in
Filter-Id = acl-999.out
user last-resort-guestssid
Vlan-Name = k2
user last-resort-any
Vlan-Name = foo
mac-user 01:02:03:04:05:06
usergroup eastcoasters
session-timeout = 99
OMMANDS
Table 42 describes the fields that can appear in display aaa output.
Table 42 display aaa Output
Field
Default Values
authport
acctport
timeout
acct-timeout
retrans
Description
RADIUS default values for all parameters.
UDP port on the WX switch for transmission of RADIUS
authorization and authentication messages. The default
port is 1812.
UDP port on the WX switch for transmission of RADIUS
accounting records. The default is port 1813.
Number of seconds the WX switch waits for a RADIUS
server to respond before retransmitting. The default is
5 seconds.
Number of seconds the WX switch waits for a RADIUS
server to respond to an accounting request before
retransmitting. The default is 5 seconds.
Number of times the WX switch retransmits a message
before determining a RADIUS server unresponsive. The
default is 3 times.