Viewing And Changing The Auto-Dap Profile; Viewing Auto-Dap Profile Settings - 3Com WX1200 Reference Manual

Viewing and
Changing the
Auto-DAP Profile
Viewing Auto-DAP
Profile Settings
Voice Configuration Tab
The Voice Configuration tab lists settings for VoIP services:
QoS Mode—Classification and marking of high priority traffic on the
WX and MAP:
WMM—Classifies, marks, and forwards traffic for Wi-Fi
Multimedia (WMM) devices based on 802.1p and DSCP values.
SVP—Optimizes forwarding of SpectraLink Voice Priority (SVP)
traffic by setting the random wait time a MAP radio waits before
transmitting the traffic to 0 microseconds.
The SVP QoS mode also requires an ACL to mark CoS in the SVP traffic.
The ACL is automatically configured by 3WXM when you use the Voice
Service Profile wizard with the SVP vendor option.
You can use an Auto-DAP profile to deploy unconfigured Distributed
MAPs. A Distributed MAP that does not have a configuration on a WX
switch can receive its configuration from the Auto-DAP profile instead.
The Auto-DAP profile assigns a Distributed MAP number and name to the
MAP, from among the unused valid MAP numbers available on the
switch. The Auto-DAP profile also configures the MAP with the MAP and
radio parameter settings in the profile. The MAP and radio parameter
settings in the Auto-DAP profile are configurable.
The Auto-DAP profile does not control SSIDs, encryption parameters, or
any other parameters managed by service profiles. You still need to
configure a service profile separately for each SSID.
A WX switch can have one Auto-DAP profile.
To view Auto-DAP profile settings:
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to Wireless.
4 Select Auto-DAP.
The Auto-DAP profile settings appear in the Content panel.

Viewing and Changing the Auto-DAP Profile

271