3Com Wireless LAN Switch WX1200 Command Reference Manual page 77

Wireless lan mobility system; wireless lan switch and controller

Hide thumbs Also See for Wireless LAN Switch WX1200:

Table of Contents

Defaults — All types of statistics are displayed for all ports. MSS

refreshes the statistics every 5 seconds. This interval cannot be

configured. Statistics types are displayed in the following order by

Receive errors

Transmit errors

Receive Ethernet statistics

Transmit Ethernet statistics

Access — All.

History—Introduced in MSS Version 3.0.

Usage — Each type of statistic is displayed separately. Press the Spacebar

to cycle through the displays for each type.

If you use an option to specify a statistic type, the display begins with that

statistic type. You can use one statistic option with the command.

Use the keys listed in Table 16 to control the monitor display.

Table 16 Key Controls for Monitor Port Counters Display

Spacebar Advances to the next statistic type.

Exits the monitor. MSS stops displaying the statistics and displays a new

command prompt.

Clears the statistics counters for the currently displayed statistics type. The

counters begin incrementing again.

For error reporting, the cyclic redundancy check (CRC) errors include

misalignment errors. Jumbo packets with valid CRCs are not counted. A

short packet can be reported as a short packet, a CRC error, or an

overrun. In some circumstances, the transmitted octets counter might

increment a small amount for a port with nothing attached.

monitor port counters