Set Mac-Usergroup Attr - 3Com Wireless LAN Switch WX1200 Command Reference Manual

254 C 8: AAA C
HAPTER
set mac-usergroup
attr
OMMANDS
Examples — The following command assigns input access control list
(ACL) acl-03 to filter the packets from a user at MAC address
01:02:03:04:05:06:
WX4400# set mac-user 01:02:03:04:05:06 attr filter-id
acl-03.in
success: change accepted.
The following command restricts a user at MAC address
06:05:04:03:02:01 to network access between 7 p.m. on Mondays and
Wednesdays and 7 a.m. on Tuesdays and Thursdays:
WX4400# set mac-user 06:05:04:03:02:01 attr time-of-day
mo1900-1159,tu0000-0700,we1900-1159,th0000-0700
success: change accepted.
See Also
clear mac-user attr on page 212
display aaa on page 219
Creates a user group in the local database on the WX switch for users
who are authenticated by a MAC address, and assigns authorization
attributes for the group.
(To configure a user group and assign authorization attributes through
RADIUS, see the documentation for your RADIUS server.)
Syntax — set mac-usergroup
group-name attr attribute-name value
group-name
32 alphanumeric characters, with no spaces.
attribute-name value
using to authorize all MAC users in the group for a particular service
or session characteristic. (For a list of authorization attributes, see
Table 44 on page 249.)
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
— Name of a MAC user group. Specify a name of up to
— Name and value of an attribute you are