Display Security 12-Restrict - 3Com Wireless LAN Switch WX1200 Command Reference Manual

display security
12-restrict
Displays configuration information and statistics for Layer 2 forwarding
restriction.
Syntax —
display security 12-restrict [vlan vlan-id | all]
— VLAN name or number.
vlan-id
— Displays information for all VLANs.
all
Defaults — If you do not specify a VLAN name or all, information is
displayed for all VLANs.
Access — Enabled.
History —Introduced in MSS Version 4.1.
Examples — The following command shows Layer 2 forwarding
restriction information for all VLANs:
VLAN Name
---- ----------- -- ---------- ------------------- ----------
1 default
2 vlan-2
Table 24 describes the fields in the display.
Table 24 Output for display security 12-restrict
Field
VLAN
Name
En
Drops
Permit MAC
En Drops Permit MAC
Y 0 00:0b:0e:02:53:3e
00:30:b6:3e:5c:a8
Y 0 04:04:04:04:04:04
Description
VLAN number.
VLAN name.
Enabled state of the feature for the VLAN:
Y — Enabled. Forwarding of Layer 2 traffic from clients
is restricted to the MAC address(es) listed under Permit
MAC.
N — Disabled. Layer 2 forwarding is not restricted.
Number of packets dropped because the destination MAC
address was not one of the addresses listed under Permit
MAC.
MAC addresses to which clients in the VLAN are allowed
to send traffic at Layer 2.

display security 12-restrict

Hits
109
5947
9
0