Help - 3Com Wireless LAN Switch WX1200 Command Reference Manual

46 C 3: S
HAPTER YSTEM

help

WX4400# help
Commands:
-------------------------------------------------------------------------
clear
commit
copy
S C
ERVICE OMMANDS
Table 7 display system output (continued)
Field
Memory
Total Power Over
Ethernet
See Also
clear system on page 40
set system contact on page 55
set system countrycode on page 56
set system idle-timeout on page 58
set system location on page 59
set system name on page 60
Displays a list of commands that can be used to configure and monitor
the WX switch.
Syntax — help
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — Use this command to see a list of available commands. If
you have restricted access, you see fewer commands than if you have
enabled access. To show a list of CLI commands available at the enabled
access level, type the following command at the enabled access level:
Clear, use 'clear help' for more information
Commit the content of the ACL table
Copy from filename (or url) to filename (or url)
Description
Current size (in megabytes) of nonvolatile memory
(NVRAM) and synchronous dynamic RAM (SDRAM), plus
the percentage of total memory space in use, in the
following format:
NVRAM size /SDRAM size (percent of total)
Total power that the device is currently supplying to its
directly connected MAP access points, in watts.