3Com Wireless LAN Switch WX1200 Command Reference Manual page 293

Table 51 Output for display ap config (continued)
Field
auto-tune
max-retransmissions
See Also
display dap connection on page 313
display dap global on page 314
display dap unconfigured on page 316
display radio-profile on page 317
set dap on page 81
set port type ap on page 91
set {ap | dap} bias on page 328
set {ap | dap} group on page 332
set {ap | dap} name on page 333
set {ap | dap} upgrade-firmware on page 346
set {ap | dap} radio mode on page 341
set {ap | dap} radio antennatype on page 334
set {ap | dap} radio channel on page 339
set {ap | dap} radio radio-profile on page 343
set {ap | dap} radio tx-power on page 344
Description
Maximum percentage of packets that can be retransmitted
by a client before RF Auto-Tuning increases power.
Note: Only packets that are received twice by the MAP are
counted as retransmissions. If a client retransmits a packet
but the MAP receives only a single copy of the packet, the
packet is not counted as a retransmission.
display {ap | dap} config 293