Display Spantree Portvlancost; Display Spantree Statistics - 3Com Wireless LAN Switch WX1200 Command Reference Manual

display spantree
portvlancost
display spantree
statistics
Shows the cost of a port on a path to the STP root bridge, for each of the
port's VLANs.
Syntax —
display spantree portvlancost port-list
— List of ports.
port-list
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command shows the STP port cost of port 1:
WX4400# display spantree portvlancost 1
port 1 VLAN 1 have path cost 19
See Also
clear spantree portcost on page 394
clear spantree portvlancost on page 395
display spantree on page 398
set spantree portcost on page 414
set spantree portvlancost on page 417
Displays STP statistics for one or more WX network ports.
Syntax —

display spantree statistics

[port-list [vlan vlan-id]]
— List of ports. If you do not specify any ports, MSS
port-list
displays STP statistics for all ports.
— VLAN name or number. If you do not specify a
vlan vlan-id
VLAN, MSS displays STP statistics for all VLANs.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.

display spantree portvlancost

403